Safety Instructions; Symbols And Icons - Parkside PABS 20-Li E6 Originalbetriebsanleitung

GB CY
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible.
An example of how to reduce vibra-
tion exposure is limiting the working
hours. For this purpose all parts of
the operating cycle have to be con-
sidered (for example, times when the
electric tool is switched off and times
when it is switched on but running
without any load).
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3,
PAP 20 B1, PAP 20 B3.
This type of battery may only be charged
with the following chargers: PLG 20 A1,
PLG 20 A3, PDSLG 20 A1, PLG 20 A4.
PAP 20
Charging
time (min.)
PLG 20 A1
PLG 20 A3
PDSLG 20 A1
PLG 20 A4
6
PAP 20 PAP 20
A1 A2
B1
60 75
30 30
60 75

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols on the appliance:
Carefully read these operating
instructions.
Electrical appliances must not be
disposed of with the domestic
waste.
Symbols on the drill set:
Wear personal protective equip-
ment. Wear eye protection!
Wear hearing protection!
Wear a dust protection mask!
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
A3
personal injury caused by
B3
electric shock.
90
Instruction symbols with information
60
on preventing damage.
90
Help symbols with information on
improving tool handling.
This device is part of the
Parkside X 20 V TEAM series