Parkside PBSA 12 D2 Originalbetriebsanleitung Seite 62

GB IE NI
Special safety directions for
battery-operated tools
a) Ensure that the device is
switched off before insert-
ing the battery. Inserting a
battery into a power tool that is
switched on may result in acci-
dents.
b) Recharge the batteries
indoors only because
the battery charger is
designed for indoor use
only.
c) To reduce the electric
shock hazard, unplug the
battery charger from the
mains before cleaning the
charger.
d) Do not subject the battery
to strong sunlight over
long periods and do not
leave it on a heater. Heat
damages the battery and there
is a risk of explosion.
e) Allow a hot battery to cool
before charging.
f) Do not open up the bat-
tery and avoid mechanical
damage to the battery.
Risk of short circuit and fumes
may be emitted that irritate the
respiratory tract. Ensure fresh
air and seek medical assistance
in the event of discomfort.
g) Do not use non-rechargea-
ble batteries!
8
CY
Correct handling of the bat-
tery charger
• Keep the equipment away from
children and pets. Children must
be supervised to ensure that
they do not play with the de-
vice.
• To charge the battery, use
only the charger supplied.
Risk of fire and explosion. This
ensures that the safety of the de-
vice is maintained.
• Before each use, check the
charger, cable and plug
and have them repaired
by qualified profession-
als and only with original
parts. Do not use a defective
charger and do not open it up
yourself. This ensures that the
safety of the device is main-
tained.
• Connect the charger only
to a socket with an earth.
Ensure that the mains volt-
age matches the specifica-
tions on the charger rating
plate. Risk of electric shock.
• Disconnect the charger
from the mains before
closing or opening con-
nection to the battery /
power tool / device.
• Keep the charger clean
and away from wet and