Safety Instructions; Symbols And Icons; General Safety Directions For Power Tools - Parkside PABS 20-Li E6 Originalbetriebsanleitung

GB IE
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible.
An example of how to reduce vibra-
tion exposure is limiting the working
hours. For this purpose all parts of
the operating cycle have to be con-
sidered (for example, times when the
electric tool is switched off and times
when it is switched on but running
without any load).
Attention! An up-to-date list
of battery compatibility can
be found at:
www.lidl.de/akku
This device can only be operated with
the following rechargeable batteries:
PAP 20 A1, PAP 20 A2, PAP 20 A3.
This type of battery may only be charged
with the following chargers: PLG 20 A1,
PLG 20 A3, PDSLG 20 A1.

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols on the appliance:
Carefully read these operating
instructions.
18
Electrical appliances must not be
disposed of with the domestic
waste.
This device is part of the
Parkside X 20 V TEAM series
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Help symbols with information on
improving tool handling.
General Safety Directions
for Power Tools
WARnInG! Read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fire and/or severe injuries.
Retain all safety directions
and instructions for future use.
The term „power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool).