Inhaltsverzeichnis; Introduction; Intended Purpose - Parkside PBSA 12 D2 Originalbetriebsanleitung

GB IE NI
Content
Introduction ................................. 4
Intended purpose ......................... 4
General description ...................... 5
Extent of the delivery ........................ 5
Overview ........................................ 5
Functional description ....................... 5
Technical data .............................. 5
Safety instructions ........................ 6
Symbols and icons ........................... 6
General Safety Directions for
Power Tools ..................................... 6
Operation .................................. 12
Removing/inserting the Battery ........ 12
Checking the battery charge level .... 12
Choice of gear .............................. 12
Set the direction of rotation ............. 12
Torque setting ................................ 12
Tool change .................................. 13
Keyless drill chuck removal .............. 13
Using the bitholder ......................... 13
Switching on/off ............................ 13
Cleaning and maintenance ......... 13
Cleaning ....................................... 14
Maintenance ................................. 14
Storage ...................................... 14
Disposal and protection of the
environment .............................. 14
Replacement parts/accessories ... 14
Guarantee ................................. 15
Repair Service ............................ 16
Service-Center ............................ 16
Importer .................................... 16
Translation of the original EC
declaration of conformity ............ 48
Exploded Drawing ..................... 53
4
CY

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a final inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety,
use and disposal. Before using the
product, familiarise yourself with
all of the operating and safety in-
structions. Use the product only as
described and for the applications
specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.

Intended purpose

The device is intended for drilling screws
in and out and for drilling holes in wood,
metal or plastic.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
The user or operator is responsible for ac-
cidents causing injury to other people or
damage to property.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.