SPALDING TF Gold 54 Benutzerhandbuch Seite 32

Fill the Assembled Unit for Use
H
FILL THE ASSEMBLED UNIT FOR USE
1. Roll the completed assembly to the
desired location.
2. Fill the base with water (approx. 34
gallons (128 Liters)) or sand (approx.
300 lbs. (136 kg)).
3. Insert the cap (48) into the base (1) to
close.
ADD TWO GALLONS (7.6 LITERS) OF NON-TOXIC ANTIFREEZE TO THE WATER IN SUB-FREEZING CLIMATES. CHECK THE
WATER LEVEL BEFORE EACH USE!
IF USING SAND: 2 GALLONS OF ANTIFREEZE IS NOT REQUIRED.
CAUTION
NOTE
32
#48
#1