Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Appendix | sensorTOOL Software
A 3.3
In the data acquisition tab, you can now start acquiring the data and log them as csv file, if necessary. You
can open the log file, e.g., in Excel.
Further settings are available under Signal Processing and CSV Output.
The Single Value tab enables a display view of the current measurement data on your screen.
Fig. 20 Data acquisition view in the sensorTOOL
optoCONTROL 1200/1201
Data Acquisition in the sensorTOOL
After you have made all settings in the IF1032/ETH web interface, close the web page in the browser
and return to the sensorTOOL.
Page 78
Werbung
Inhaltsverzeichnis
