Operation; Menu Structure - EuroLite LED Twin Scan Bar Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or the IR remote control and in DMX-controlled mode via any commercial DMX
controller as well as wireless via QuickDMX with the optionally available EUROLITE QuickDMX USB
Wireless Transmitter/Receiver.
After you connected the effect to the mains, the LED Twin Scan Bar starts running. During the Reset, the
motors are trimmed and the device is ready for use afterwards.
The main menu is accessed by pressing the MENU button. Browse through the menu by pressing the MENU
button. Press the ENTER button in order to select the desired menu. You can change the selection by
pressing UP or DOWN. Confirm every selection by pressing the ENTER button. The functions provided are
described in the following sections.
Quick access via potentiometer:
The brightness and sensitivity for microphone, can be controlled via the potentiometers on the back of the
device (see device overview), thus providing quick access to the static settings.

Menu structure

Mode
Automatic mode
Sound control
Manual mode
DMX mode
Display
Program
Color1
AUTO Gobo1
Color2
Gobo 2
Program
Color1
SOUND Gobo1
Color2
Gobo2
COLO
Pan
Tilt
Manual Color
Gobo
Dimmer
Strobe
dXXX
02CH (d001-d511)
05CH (d001-d508)
dXXX 07CH (d001-d506)
08CH (d001-d505)
14CH (d001-d499)
001-xxx
Function
AP1-AP16 Auto program 1-16
0–8
0:auto 1-8:select different color
0–8 0:auto 1-8 select different gobo
0–8 0:auto 1-8:select different color
0–8
0:auto 1-8 select different gobo
SP1-SP16 Sound program 1-16
0–8 0:sound 1-8: select different color
0–8
0:sound 1-8 select different gobo
0–8 0:sound 1-8: select different color
0–8
0:sound 1-8 select different gobo
000–255 Pan move 0-100%
000–255 Tilt-move 0-100%
000–255
Color selction
000–255 Gobo selction
000–255 Brightness 0-100%
000–255
Strobe effect slow > fast
2-channel mode
5-channel mode
7-channel mode
8-channel mode
14-channel mode
Starting address
32/44
Scanner 1 & 2
00141601.DOCX, Version 1.0