Inhaltsverzeichnis
Werbung
REF.NR.
DESCRIPTION
5
CARBON BRUSH HOLDER
6
CARBON BRUSH SET (2 PCS)
7
CARBON BRUSH CAP
10
STATOR
14
BALL BEARING 607 Z
15
ROTOR
16
BALL BEARING 6000 Z
43+44
SWITCH + CAPACITOR
55
GEAR
59
BALL BEARING 6001 ZZ
74
INNER FLANGE
54
SPARE PARTS
FERM NR.
409400
CIRCULAR SAW
409401
409402
THE PICTURES MENTIONED IN THE TEXT ARE
409403
CORRESPONDING WITH THE PICTURES AT
PAGE 2.
800607
409404
SAFETY AND OPERATING INSTRUCTIONS
806000
For your own safety and for the safety of others,
409414
please read these instructions carefully before
409416
using this appliance. It will help you understand your product
806001
more easily and avoid unnecessary risks. Keep this instruction
409410
manual in a safe place for future use.
CONTENTS
1. Machine data
2. Safety instructions
3. Assembly and adjusting instructions
4. Operation
5. Maintenance
1. MACHINE DATA
TECHNICAL SPECIFICATION
Voltage
Frequency
Power input
No load speed
Saw blade dimensions
Number of teeths
Weight
Lpa (sound pressure level)
Lwa (sound power level)
aw(vibration value)
PRODUCT INFORMATION
Fig. A.
1. Handgrip
1A.Extra handgrip
2. Type plate
3. On/off switch
4. Handle to set sawing depth
5. Power cord
6. Riving knife
7. Saw blade safety guard
8. Hexagonal bolt
9. Soleplate
10. Flange
11. Saw blade
12. Rip fence
13. Rip fence clamping knob
14. Handle to set sawing angle
-
Shaft lock (Fig. C3)
UNPACKING
The circular handsaw is shipped with:
-
Rip fence
Ferm
Ferm
-
TCT Saw blade Ø 210 mm
-
Box spanner
Check first whether or not the delivery has been
damaged by transport and/or whether all the parts are
present.
2. SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don't
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
| 230 V~
| 50 Hz
Keep bystanders away
| 1800 W
| 5000/min.
|
Ø210 x Ø30x 2,4mm
| Z40
| 6,4kg
| 97,2 dB(A)
| 110,2 dB(A)
Wear ear and eye protection
| 1.138 m/s
2
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
Always check that the power supply corresponds to
the voltage on the rating plate.
Class II machine – Double insulation – You don't
need any earthed plug.
Replacing cables or plugs
If the mains cable becomes damaged, it must be replaced
with a special mains cable available from the
manufacturer or the manufacturer's customer service.
Dispose of old cables or plugs immediately after
3
Werbung
Inhaltsverzeichnis
