Inhaltsverzeichnis
Werbung
GB
Unpacking
The circular handsaw is shipped with:
D
1 Rip fence
1 TCT Saw blade Ø 165 mm
1 Allen key
NL
Check first whether or not the delivery has been damaged by transport and/or whether all the
parts are present.
F
2. SAFETY INSTRUCTIONS
The following pictograms are used in these instructions for use:
E
Read instructions carefully
P
In accordance with essential applicable safety standards of European directives
I
Class II machine – Double insulation – You don't need any earthed plug.
S
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
SF
Indicates electrical shock hazard.
N
Immediately unplug the plug from the mains electricity in the case that the cord
gets damaged and during maintenance
DK
Keep bystanders away
Wear ear and eye protection
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
Danger
a) Keep hands away from cutting area and the blade. Keep your second hand on
auxiliary handle, or motor housing. If both hands are holding the saw, they cannot be
cut by the blade.
b) Do not reach underneath the workpiece. The guard cannot protect you from the blade
below the workpiece.
c)
Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the
blade teeth should be visible below the workpiece.
d) Never hold piece being cut in your hands or across your leg.
04
Ferm
Ferm
UK
D
NL
F
E
P
I
DK
SF
N
DK
97
Werbung
Inhaltsverzeichnis
