Cleaning The Accessory Parts - Silvercrest 359294 2010 Montage-, Bedienungs- Und Sicherheitshinweise

Clean the HEPA filter
Only clean with a paintbrush or soft brush.
Do not clean the HEPA filter
with water!
Rinse the stainless steel filter
carrier under clear water.
26
Clean the dust collector
damp cloth.
Leave the dust collector
steel filter with filter carrier
27
oughly before you put all the parts back in the
reverse order.
Replace the cover
and secure it by turning it to the left until the
marking on the cover
20 GB/IE/NI/CY
24
25
26
27
21
by tapping it out.
25
25
with the filter
27
thoroughly using a
21
and the stainless
21
to dry thor-
26
of the dust collector
24
is above the - symbol.
24
Note: Check the filters (HEPA filter
stainless steel filter
ing for damage or deformations. Filters, which
indicate damage or deformations or which can
no longer be cleaned must be replaced. Please
contact customer service if this happens.

Cleaning the accessory parts

ELECTRIC SHOCK! Always switch
off the product before cleaning and
remove the mains adapter
the mains socket.
ELECTRIC SHOCK! Do not im-
merse the product, the rechargeable
21
battery , the mains cable or the
2
mains adapter
liquids to clean it.
Do not clean the product when it
is charging.
Let the product cool before you
clean it.
Remove the rechargeable battery
before cleaning.
2
and
25
) regularly when clean-
27
DANGER OF
from
8
DANGER OF
in water or other
8
24