3 . Tap out the dust filter
bin .
4 . Clean the dust filter
leave them to air dry completely afterwards .
5 . Reinsert the dust filter
left (in the direction of the
filter housing
6 . Reinsert the dust filter
container
. Always make sure that the dust filter
3
in the dirt container
7 . Place the dirt container
the two
▯
markings under the
and on the edge of the appliance are aligned with each other
(see Fig . 6) . Turn the dirt container
edge of the appliance is under the
and the dirt container
Cleaning the appliance
1 . Clean the housing and the 2-in-1 suction nozzle
moistened cloth . For stubborn soiling use a mild detergent on the
cloth .
2 . Remove hair, lint and threads from the brush nozzle of the 2-in-1
vacuum nozzle
3 . Dry all parts thoroughly before using the appliance again or
storing it .
■
20
│
GB │ IE │ NI │ CY
and the filter housing
5
and the filter housing
5
in the filter housing
5
(see Fig . 9) .
4
and the filter housing
5
and the rubber lip seals the dirt container
3
back on the appliance . Make sure that
3
locks audibly into the appliance .
3
.
w
4
symbol) until it is seated firmly in the
symbol on the dirt container
until the ▯ marking on the
3
symbol on the dirt container
into a waste
4
in tap water and
4
and turn it to the
into the dirt
4
sits straight
5
with a lightly
w
SHD 7.4 A1
.
3
3
3