Using The Unit - Stihl HSE 61 Gebrauchsanleitung

3 Using the Unit

any of the above symptoms appear (e.g. tingling
sensation in fingers), seek medical advice.
2.8 Maintenance and Repairs
Always switch off the machine and disconnect
the plug from the power supply before carrying
out any maintenance work to reduce the risk of
injury from the motor starting unintentionally.
Service the machine regularly. Do not attempt
any maintenance or repair work not described in
the instruction manual. Have all other work per‐
formed by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine. If you have any questions in this
respect, consult a servicing dealer.
STIHL recommends the use of genuine STIHL
replacement parts. They are specifically
designed to match your machine model and
meet your performance requirements.
Never attempt to modify your power tool in any
way since this will increase the risk of personal
injury.
Regularly check that the insulation of the power
cord and plug is in good condition and shows no
sign of ageing (brittleness).
Electrical components, e.g. power cord, may only
be repaired or replaced by a qualified electrician.
Clean plastic components with a cloth. Do not
use aggressive detergents. They may damage
the plastic.
Do not spray the machine with water.
Check tightness of mounting screws on safety
devices and the cutting attachment and retighten
if necessary.
Clean cooling air inlets in motor housing as nec‐
essary.
Store the machine is a safe and dry place.
0458-279-9621-B
3 Using the Unit
3.1 Cutting Season
Observe country-specific or municipal rules and
regulations for cutting hedges.
Do not use your power tool during other people's
rest periods.
3.2 Preparations
Use lopping shears or a chain saw to cut out
thick branches first.
3.3 Cutting Sequence
Cut the sides of the hedge first, then the top.
If a radical cut is necessary, cut a little at a time
in several stages.
3.4 Rotating handle
Your hedge trimmer is equipped with a rotating
handle to enhance user comfort – see chapter on
"Rotating Handle".
3.5 Disposal
Do not throw cuttings into the garbage can – they
can be composted.
3.6 Working Technique
3.6.1 Vertical cut
English
23