Cleaning Of The Water Dispenser - Pkm SBS450 NFDWD Bedienungsanleitung

6.2 Cleaning of the water dispenser

WARNING!
Remove all overflowed or spilled water from the
appliance or the floor. RISK OF SLIPPING! RISK OF ELECTRIC SHOCK!
❖ Empty the water tank before you remove it.
❖ Clean all parts of the water tank and the dispenser using hot soapy water before
you use the dispenser for the first time.
❖ You have to remove the water tank for cleaning.
1. Hold both sides of the water tank tightly; then
lift and remove it from the door at an angle of
45 carefully. Ensure that the water valve (C) at
0
the bottom of the water tank has come free of
22
the opening in the door (B) completely.
a) When removing the water tank it is possible that the sealing ring (A) of the water
valve (C) is also pulled out of the door of the appliance. In this case, you must
replace the sealing ring. Proceed as follows:
b) Align the sealing ring (A) with the appropriate
opening (B) in the door of the appliance.
Depending on model
22
H
OW TO REMOVE THE WATER TANK
107
: