Replacing Of The Illuminant - Pkm SBS450 NFDWD Bedienungsanleitung

2.
Reinstall the cover (D) of the water tank (E)
properly again: Put one side of the cover on the
water tank first and then the other side. Push
the edges of the cover on the water tank firmly
but carefully.
3.
Ensure that the sealing ring is seated properly
(B).
4.
Install the water tank on the door. Ensure that
the sealing ring has been inserted into the ap-
propriate opening before. Hold both sides of
the water tank tightly. Insert the water valve
into the appropriate opening and install the wa-
ter tank at an angle of 45
5. Place the water tank in proper position by pushing it downwards slightly and care-
fully until the water tank is seated properly in the door of the appliance.

6.3 Replacing of the illuminant

WARNING! The LED-illuminant must be replaced by a competent
person only. If the LED-illuminant is damaged, please contact a qualified
professional (not covered by the guarantee).
WARNING! This product contains a LED light source of energy effi-
ciency class F according to EU Regulation 2019/2016.
0 .
109