Pkm SBS450 NFDWD Bedienungsanleitung Seite 67

3. If gas is set free at the installation site:
a) Open all windows.
b) Do not unplug the appliance and do not use the control panel
or thermostat.
c) Do not touch the appliance until all the gas has gone.
d) Otherwise sparks can be generated which will ignite the gas.
4. Keep all components of the appliance away from fire and other
sources of ignition when you dispose of or decommission the appli-
ance.
5. Do not install the appliance near of volatile or combustible materi-
als(e.g. gas, fuel, alcohol, paints) and in rooms which may have poor
air circulation (e.g. garage).
6. EXPLOSION HAZARD! Do not store any explosive materials or
sprays, which contain flammable propellants, in your appliance. Ex-
plosive mixtures can explode there.
7. While unpacking, the packaging materials (polythene bags, polysty-
rene pieces, etc.) should be kept away from children and pets. CHO-
KING HAZARD! RISK OF INJURY!
8. Always observe the required minimum distances for proper ventila-
tion.
9. Do not connect the appliance to the electric supply unless all pack-
aging and transit protectors have been removed.
10. Operate the appliance with 220~240V/50Hz/AC only. All connec-
tions and energy-leading components must be replaced by
an authorized professional. Do not use a socket board or a multi
socket when connecting the appliance to the mains.
11. A dedicated and properly grounded socket meeting the data of the
plug is required to minimize any kind of hazard. The appliance must
be grounded properly.
12. Always check that the power cord is not placed under the appliance
or damaged by moving the appliance.
13. The technical data of your energy supplier must meet the data on the
model plate of the appliance.
14. Your domestic circuit must be equipped with an automatic circuit
breaker.
15. Do not modify the appliance.
16. Turn off the power before you install the appliance and before you
connect it to the mains. RISK OF FATAL ELECTRIC SHOCK!
17. Disconnect the appliance from the mains before you clean or main-
tain it. RISK OF ELECTRIC SHOCK!
18. Remove possible dust accumulation at the power plug, at the safety
power socket and at all plug connectors regularly. RISK OF FIRE!
67