7. Install the appliance in a dry and well-ventilated place.
8. Protect the appliance from direct sunlight.
9. The door(s) must open completely and without hindrance.
10. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
11. Connect the appliance to the mains properly.
12. The rating plate is inside the appliance or at the back.
3.2 Space and ventilation requirements
Observe the required minimum distances for proper ventilation (s. chapter 3.2.2
V
).
ENTILATION
3.2.1 Space requirement
S
PACE REQUIREMENT OF THE APPLIANCE WHEN THE DOORS ARE CLOSED
72
: