Operation; Before Initial Operation; Setting Of The Temperature - Pkm SBS450 NFDWD Bedienungsanleitung

NOTICE! The rollers (depending on model) are no castors and intended
to move the appliance forward and backwards only. Lateral movements
can damage your floor and the rollers.

4. Operation

WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.

4.1 Before initial operation

WARNING!
While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
NOTICE! Leave the appliance in an upright position for at least 4 - 6 hours
before you connect it to the mains to ensure, that the oil has flowed back
into the compressor.
NOTICE! If you use the appliance for the first time or the appliance has
been disconnected from the mains for a longer period of time, allow the
appliance to cool down for 3 until 4 hours on medium temperature setting
(s. chapter 4.5

SETTING OF THE TEMPERATURE

or frozen food in the appliance. If you place food in the appliance before it
has reached its normal operating temperature, this foods can thaw and /
or spoil.
1. Remove all packaging materials.
2. Adjust the feet and clean the appliance (see chapter
).
MAINTENANCE
3. Do not start the appliance immediately after installation. Wait at least 4 - 6 hours
to ensure proper operation.
4. The settings of the temperature of both the fridge and freezer can be adjusted
manually by pressing the relevant buttons until the desired values will be indicated
(s. chapter 4.5 S
5. If operation was interrupted, wait at least 5 minutes before restart.
6. The appliance needs some time to balance temperatures when you have changed
the settings before or when you have stored additional food in the appliance. The
duration of this period of time depends on the range of the change, the ambient
ETTING OF THE TEMPERATURE
) before you place any fresh
CLEANING AND
).
78