Pkm SBS450 NFDWD Bedienungsanleitung Seite 108

c) Insert the sealing ring into the opening (B)
properly again.
2. Now unscrew the water valve (C) of the water
tank (anticlockwise).
3. First, push the connector / flange of the cover
of the water tank on one side of the water tank
upwards slightly and carefully to separate the
cover of the water tank (D) from the water tank
(E) itself. Then repeat the procedure on the
other side of the water tank.
Remove the cover from the water tank.
4. Clean all parts (water tank, cover of the water tank, water valve) using hot soapy
water. Rinse well using clear water and dry all parts thoroughly.
5. It is recommended to clean the water dispenser, water tank, cover of the water
tank and water valve at least once per month in this way.
1.
Screw the water valve (C) onto the water tank
properly again (clockwise).
H
OW TO REINSERT THE WATER TANK
108
: