Cleaning Of The Water Dispenser - Pkm SBS376NFWD IX Bedienungsanleitung

6.3 Cleaning of the water dispenser

WARNING! Remove all overflowed or spilled water from the appliance or
the floor. RISK OF SLIPPING! RISK OF ELECTRIC SHOCK!
❖ Empty the water tank before you remove it.
❖ Clean all parts of the water tank and the dispenser using hot soapy water before you
use the dispenser for the first time.
❖ You have to remove the water tank for cleaning.
H
1. Clean all parts of the water tank and the water
dispenser with warm soapy water before using the
water dispenser for the first time. You must
remove the water tank for cleaning. To do this,
hold the two sides of the tank firmly and then lift
it off the door at a 45° angle.
2. Remove the O-ring by gently pulling it off the
bottom of the tank.
Clean all parts (water tank, cover, O-sealing ring and water valve) with warm
3.
soapy water. Then rinse everything well with clear water and dry all parts.
4. Attach the O-sealing ring to the bottom of the
water tank. Make sure that there are no folds or
creases in the process.
/
OW TO REMOVE REINSERT THE WATER TANK
97
: