To Set The Product In Transport Position - Husqvarna BMG 555 Bedienungsanweisung

1. Attach the lifting equipment at the lifting eyes (A).
A
A
2. Lift the product safely.

To set the product in transport position

1. Fold down the handlebar. Refer to
height of the handlebar on page 41 .
2. Turn the lever (A) for the dust skirt up.
A
56
A
A
To adjust the
To attach the product to a
transportation vehicle
Use the lifting eyes to attach the product to the
transportation vehicle.
1. Attach the tie-down straps in the lifting eyes.
2. Attach and tighten the tie-down straps to the
transportation vehicle.
Storage
CAUTION:
storage outdoors. Always keep the product
indoors.
• Keep the product in a dry and frost free area.
• Clean the product and do a complete servicing
before you put the product in storage.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
Disposal
Symbols on the product or the packaging of the product
indicate that this product cannot be handled as domestic
waste. It must be submitted to an appropriate recycling
station for the recovery of electrical and electronic
equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise
result through the incorrect waste management of this
product. For more detailed information about recycling
this product, contact your municipality, your domestic
waste service or the shop from where you purchased
the product.
Do not put the product in
1806 - 002 - 14.04.2022