J) Steering Servo - Reely titan Bedienungsanleitung

j) Steering servo

SE1
The steering servo (not included in delivery) is installed on the chassis using
the two angle brackets "SE1". The adjustable servo rod is installed between
the servo arm and the steering linkage using two M3x10mm screws.
The final alignment of the servo arm on the servo axis or the adjustment of
the servo rod is carried out after assembly is completed (after the installation
of the speed controller and the remote control). For this purpose, the servo
might have to be removed again so that the servo arm can be adjusted on
the servo axis.
The angle brackets are screwed to the chassis using 2 countersunk tapping
screws each.
63