General Warnings - Olimpia splendid Bi2 SL SMART S1 Serie Installationsanweisung Und Wartung

1.3 - GENERAL WARNINGS

BASIC SAFETY PRECAUTIONS MUST ALWAYS BE FOLLOWED IN ORDER
TO REDUCE RISKS OF FIRE, ELECTRIC SHOCKS
AND INJURY, INCLUDING THE FOLLOWING:
1. After unpacking, make sure that all the components are present. If not,
contact the OLIMPIA SPLENDID agent who sold the appliance to you.
2. OLIMPIA SPLENDID appliances must be installed by an authorised installer
who, on completion of the work, will release a declaration of conformity
to the client in respect of the laws in force and the indications given by
OLIMPIA SPLENDID in the instructions leaflet supplied together with the
appliance.
3. These appliances have been designed both for conditioning and/or heating
environments and must be destined for this use only and compatibly with
their performance characteristics.
OLIMPIA SPLENDID accepts no responsibility, either contractual or extra-
contractual, for any damage caused to persons, animals of property as a
result of incorrect installation, adjustment or maintenance or improper use.
4. In case of water leaks, turn the master switch of the system to "OFF" and
close the water taps.
As soon as possible, call the OLIMPIA SPLENDID technical service
department or else professionally qualified personnel and do not intervene
personally on the appliance.
5. In the Bi2 installation, inaccessibility to the rear of the appliance must be
guaranteed.
In the event this is not guaranteed by the wall or ceiling, it is obligatory to
use the rear closure kit available as an accessory.
6. If the appliance is not used for a log period of time, the following operations
should be performed:
- Turn the master switch of the system to "OFF"
- Close the water taps
- If there is the risk of freezing, make sure that anti-freeze has been added
to the system otherwise empty the system.
7. The electrical system must be made in full compliance with the applicable
laws and regulations, it must be earthed and have adequate protection
against overloads and/or short-circuits. Installation of an omnipolar
disconnection switch and suitable electrical protection is advisable on the
power line of each appliance installed.
8. An excessively high or low temperature (depending on the operating mode)
is harmful to the health and wastes energy needlessly.
Avoid prolonged contact with the direct air flow.
EN - 38
WHEN USING ELECTRICAL EQUIPMENT,