Install Plasterboard Adapter Els-Va And Spacer Frame Els-Agr To Els-Gu - Helios ultraSilence ELS-GU Montage- Und Betriebsvorschrift

Installation and Operating Instructions
EN
Casing type ELS-GU
4�9 Install plasterboard adapter ELS-VA and spacer frame ELS-AGR to ELS-GU
Installation: Plasterboard adapter ELS-VA to front-side flush-mounted casing insert in cladded sanitary walls.
Kit consists of plasterboard adapter and four plastic screws.
Fig�34
Fig�36
Fig�38
Installation of
spacer frame
ELS-AGR
for covering
plasterboard
adapter ELS-VA.
Fig�40
Installation of spacer
frame ELS-AGR
for covering
flush-mounted casings
(discharge to back) if
they are unclean or
too large.
Fig�35
Connect eletrical
line to the con-
nection terminals
in the casing�
(see Fig� 48f)
Connect flex-
pipe (DN 80) to
discharge spi-
got and seal�
Fig�37
Install perpen-
dicularly�
IMPORTANT:
Casing must
not be distor-
ted by uneven-
ness!
Screws not
provided
by Helios
Fig�39
Fig�41
Final assembly:
Connect ELS
facade to spa-
cer frame ELS-
AGR
12
Do not kink
flexpipe
bend radius
R > DN
max� 25 mm
Installation of spacer frame
ELS-AGR
for covering wall openings if
they are unclean or too large.