Chapter 1 Els Quick Overview; Type Overview Of Flush-Mounted Casing; Els Accessories - Helios ultraSilence ELS-GU Montage- Und Betriebsvorschrift

Installation and Operating Instructions
EN
CHAPTER 1
ELS QUICK OVERVIEW
ELS-ARS
Conversion kit for moun-
ting in ELS-V��� discharge
to back, consisting of guide
plate and 4 plastic rivets for
metal nozzles.
Ref� no� 8185
PAGE 7
ELS-ZS
Second room kit,
consisting of spigots for sec-
ond room connection, extract-
ion unit and foil insert
air regulation.
Ref� no� 8186
PAGE 8
ELS-WCS
WC extraction kit, consis-
ting of 90° bend with DN 50,
reduction DN 40 and 30.
Ref� no� 8191
PAGE 8
ELS-MHU
Mounting bracket,
flush-mounted for fixing
casing to wall or ceiling.
Ref� no� 8187
PAGE 9
ELS-MB
Mounting holder, for plas-
terboard and flush-mounted
installation. Can be used for
all common plasterboard
systems
Ref� no� 8188
PAGE 10
ELS-VA
Plasterboard adapter, for
retrospective installation in
plasterboard
Ref� no� 8189
PAGE 12
Casing type ELS-GU
1�1 Type overview of flush-mounted casing
1�2 ELS accessories
(1) for
External switches ZNE/ZNI must only be used for sing-
le-speed fans V 60 and V100�
(1) When using the second room kit ELS-ZS,
the foil insert must be kept in the flush-mounted box
until final assembly!
ELS-GU
Flush-mounted casing
Plastic
Ref� no� 8111
PAGE 5
ELS-AGR
Spacer frame, for fixing bet-
ween wall and inner facade,
if the flush-mounted casing
protrudes over the plaster.
Ref� no� 8193
PAGE 12
ELS-PB
Plasterboard cover, for
covering gaps if casing cut-
outs have been uncleanly
plastered/tiled or if they are
too large.
Ref� no� 8194
PAGE 13
ELS-ZAS
Second room connection
spigots
required if ELS-ZS is not used.
DN 75/80
Ref� no� 8184
PAGE 8
ELS-ZNE
Electronic overrun timer
with variable overrun times
Installation: Flush-mounted
box behind switch
Ref� no� 0342
PAGE 16
ELS-ZNI
Electronic interval timer
with adjustable interval and
overrun times
Installation: Flush-mounted
box behind switch
Ref� no� 0343
PAGE 16
m
CAUTION
NOTE
2
ELS-UPA
Flush-mounted spacer
frame for flush-mounted
casing. Used when ELS-GU
and ELS-GUBA are installed
too deep.
Ref� no� 7332
ELS-APASA
Surface-mounted adapter
with side inlet for ELS-GU
and ELS-GUBA.
Ref� no� 7328
ELS-VSR
Sunken frame for
flush-mounted wall and
ceiling installation of inner
facade, suitable for ELS-GU
and ELS-GUBA.
Ref� no� 7322