Herunterladen Inhalt Inhalt Diese Seite drucken

Checking The Battery Charge Level; Fixing/Attaching The Shoulder Strap; Mounting The Saw Chain And Blade; Tightening And Checking The Saw Chain - Parkside PAHE 20-Li C3 Originalbetriebsanleitung

Hochentaster 20 v
Vorschau ausblenden Andere Handbücher für PAHE 20-Li C3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28

Checking the battery charge level

Press the battery charge level button
check the status of the battery. The status/
remaining charge will be shown on the battery
display LED
RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery

Fixing/attaching the shoulder strap

Hook the shoulder strap
lug
.
Adjust the length of the shoulder strap
your size so that carrying lug
when hooked in place.
In addition, you can adjust the height of the
carrying lug
on the appliance shaft
loosening the screw.

Mounting the saw chain and blade

WARNING!
Wear protective gloves! There is a danger
of injury from the sharp cutting teeth!
The sprocket cover
tensioning ring
are not pre-assembled on the appliance at
delivery.
The turning of the blade
the manufacturer.
The chain travel direction
blade
must be adhered to every assembly.
Place the saw chain
Ensure that
the saw chain
the correct direction (see Fig. B).
PAHE 20-Li C3
as follows:
into the carrying
to
is at hip height
together with the chain
and the fixing screw
is not intended by
on the
on the blade
.
is running in
Attach the blade
upwards and guide the saw chain
to
the chain sprocket
The guide rail
guide
(see Fig. C).
Put the sprocket cover
Tighten the fixing screw
Now, tighten the saw chain

Tightening and checking the saw chain).

Tighten the fixing screw
Tightening and checking
the saw chain
WARNING!
Wear protective gloves! There is a danger of
injury from the sharp cutting teeth!
by
Undo the fixing screw
Turn the chain tensioning ring
direction to increase the tension.
The saw chain
of the blade.
Check whether the saw chain
over the blade by hand
Now tighten the fixing screw
NOTE
A new saw chain
tightened more regularly.
with the labelling facing
around
.
must be above the blade
on.
slightly.
(see section
completely.
.
in a clockwise
must lie against the underside
can be drawn
.
completely.
stretches and must be
GB │ IE
 11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis