Maintenance; Precautionary Measures; Checkpoints; Table 7.2-1: Checkpoints And Lubrication Schedule - probst AL-90/NSH-40 Bedienungsanleitung

Maintenance

7. Maintenance
This chapter provides information about the maintenance of the machine. This chapter is
intended for the maintainer of the machine.
7.1.

Precautionary measures

Maintenance of the machine may only be performed if the machine if voltage
free. Comply with the safety regulations in chapter 3.

7.2. Checkpoints

The machine must regularly be checked according to the points in Table 7.2-1.
Item number Description
1 clean stone debris from the machine
2 check machine for oil leakage
3 check oil level in the oil reservoir of the
hydraulic unit.
The oil level must be between 2 and 3 cm
under the top of the reservoir.
If necessary, top off with Bio degradable
hydraulic oil
Type: Castrol Carelube SES 32
4 Replace oil.
Bio degradable hydraulic oil
Type: Castrol Carelube SES 32
The oil level must be between 2 and 3 cm
under the top of the reservoir.
5 Check the upper and lower blades for wear.
If necessary, rotate the blades.
A blade has 3 cutting edges. See also the
provided exploded view drawing.
Steps:
 Loosen attachment screws
 Rotate blade
 Tighten attachment screws.
6 Check machine for wear and damage.

Table 7.2-1: Checkpoints and lubrication schedule

Time interval
Daily
Daily
Monthly
Annually
Monthly
Monthly
19 / 21