Herunterladen Inhalt Inhalt Diese Seite drucken

Machine Options; Liability; Service; Warranty Conditions - probst AL-90/NSH-40 Bedienungsanleitung

Hydraulischer platten- und verbundsteintrenner
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Introduction

2.5. Machine options

There is no optional equipment that can be added to the existing version of the machine.

2.6. Liability

When injury or harm to persons or damage to the machine or products is the result of not
following these operating and maintenance instructions, Probst GmbH cannot be held liable.

2.7. Service

For service contact your dealer or your own maintenance department.

2.8. Warranty conditions

If within 12 months of delivery, Probst GmbH is notified of deficiencies in the delivered machine
that are caused by defects in materials or workmanship and is provided with the serial number
and the original receipt, Probst will repair these defects.
All warranty obligations expire if:
 Repairs or modifications are made to the machine by others, without instruction from
Probst, in an incompetent manner;
 Non-original parts are used;
 the damage or defects are the result of connecting the machine in a manner other than
intended, incompetent use, or failure to follow the regulations and instructions for use;
 the deficiencies are the result of normal wear of the machine.
Probst reserves the right to have work on the machine carried out by third parties during and
after the warranty period.

Figure 2.4-8: No irregular stones

10 / 21

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis