Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Foreword
1.
Foreword
This foreword contains general information about and for this user manual.
1.1.
Name of machine
The name of the machine is "Hydraulic block cutter".
1.2. Warning
Read this user manual carefully before use and before maintenance of the machine is carried
out. Only then is optimal safety ensured. The machine may only be operated and maintained by
personnel who have received special training.
There are moving parts on the machine!
For this reason, the machine must always be switched off and the electrical supply must be
disconnected before maintenance and/or repairs are carried out.
Always be careful of the moving, sharp and/or protruding parts; they can cause injury!
While cutting, always remain at a safe distance.
Always be careful of the moving, sharp and/or protruding parts; they can cause injury!
While cutting, always remain at a safe distance.
1.3.
Target group for each chapter
This user manual is intended to provide information to the persons/departments listed below
the owner
the operator
the maintainer
Next to the heading of each chapter is indicated for which of the groups described above the
chapter is intended.
Table 1.3-1 provides an overview of the target groups for each chapter.
Chapter
Title
-
Table of contents
1
Foreword
2
Introduction
3
Safety regulations
4
General description of the machine
5
Transport, storage and setup of the machine
6
Operation of the machine
7
Maintenance of the machine
8
Trouble
9
Disposal of the machine
Table 1.3-1: Overview of the target groups for each chapter
Owner
Operator
Mantainer
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
4 / 21
Werbung
Inhaltsverzeichnis
