Safety regulations
11 / 21
3.
Safety regulations
This chapter provides information concerning the general safety regulations. This chapter is
intended for the owner, the operator and the maintainer of the machine. Read this chapter
carefully before use of the machine and before carrying out repairs on the machine.
3.1.
Safety provisions
3.1.1.
General
For the exact location of the various provisions, see Figure 3.2-1.
It is absolutely forbidden to remove or disable the safety provisions.
3.1.2. Emergency stop
The machine is not equipped with an emergency stop provision.
An emergency stop does not contribute to a safer work situation.
3.1.3. Safety shields
The machine has no external moving parts except the upper blade.
To protect it from external contaminants, such as rain, dirt and falling debris, the hydraulic unit
is enclosed in a separate housing.
Only personnel that have received sufficient instruction may open safety shields to perform
maintenance and/or repairs. Also refer to section 1.3 "Target group for each chapter".