Figure 2.4-5: Basalt Blade Center; Figure 2.4-6: Switching Blades; Figure 2.4-7: Maximum Unevenness Of The Stone - probst AL-90/NSH-40 Bedienungsanleitung

Introduction 9 / 21
Only one basalt blade in the middle of the stone cutter can also be used, see Figure 2.4-5.

Figure 2.4-5: Basalt blade center

See how to change blades in Figure 2.4-6.
It is forbidden to use the machine for purposes other than the cutting of stone products.

Figure 2.4-6: switching blades

Figure 2.4-7: Maximum unevenness of the stone