Introduction; The User; The Manufacturer; Machine Identification - probst AL-90/NSH-40 Bedienungsanleitung

Introduction

2. Introduction
This chapter provides basic information about the machine and the accompanying user manual.
This chapter is intended for the owner, the operator and the maintainer of the machine.

2.1. The user

Read this user manual carefully before use and before maintenance of the
machine is carried out. Only then is optimal safety ensured.
The machine may only be operated by qualified personnel. The operator must read the
chapters indicated in Table 1.3-1 carefully.
Maintenance of the machine may only be carried out by specially trained personnel from the
maintenance department. The maintainer must read the chapters indicated in Table 1.3-1
carefully.

2.2. The manufacturer

The manufacturer of the machine is:
Probst GmbH
Gottlieb-Daimler-Straße 6
D-71729 Erdmannhausen
info@probst-handling.de
www.probst-handling.de

2.3. Machine identification

The machine is provided with the CE-mark. This is shown on the type plate. See Figure 2.3-1.
The CE-mark indicates that this machine satisfies the fundamental health and safety
requirements of the European Union. Also refer to the warning in section 1.2.
In addition to the CE-mark, the data indicated below is also shown on the type plate. See also
Figure 2.3-1:
 Name and address of the manufacturer
 Type indication
 Year of manufacture
 Serial number
 Required supply voltage
 Weight
6 / 21