Replacing Of The Illuminant; Trouble Shooting; Possible Cause - Pkm KS82.3A+ UB Bedienungsanleitung

2. If the automatic defrosting does not meet the requirements, e.g. on days with
high ambient temperatures and humidity, defrost the appliance manually as
described above.
5.2

Replacing of the illuminant

WARNING! The LED-illuminant must be replaced by a competent person
only. If the LED-illuminant is damaged, please contact a qualified
professional (not covered by the guarantee).
NOTICE! This product contains a LED light source of energy efficiency class
G according to EU Regulation 2019/2015.

6. Trouble shooting

POSSIBLE CAUSE

➢ The plug of the appliance is not
connected to the socket.
➢ The plug has become loose.
➢ The socket is not supplied with
energy.
➢ The fuse is switched off.
➢ The voltage is too low.
➢ Incorrect energy supply.
➢ The appliance has been switched off
for a while.
➢ Too much or too hot food in the
appliance.
➢ Doors opened too often or too
long.
➢ The door was frequently opened.
➢ The door is not properly closed.
➢ Encrusted ice inside the appliance.
➢ The current temperature setting is
MALFUNCTION
The appliance does not work at all.
The compressor does not work at all.
The compressor operates for too long.
Unsatisfactory cooling capacity.
MEASURE
➢ Check the corresponding socket by
connecting it with another appliance.
➢ Check the fuse box.
➢ Compare the data on the model
plate with the data of your energy
supplier.
➢ Check the energy supply.
➢ The appliance needs some time to
reach the preset temperature.
➢ Remove any hot food.
➢ Do not open the door too
often/too long.
➢ Select a different setting if necessary.
➢ Check the door/door seals.
➢ Defrost the appliance.
44