Pkm KS82.3A+ UB Bedienungsanleitung Seite 45

too warm
➢ Warm or hot food inside the
appliance.
➢ The appliance is overfilled.
➢ The door seals are damaged.
➢ The door is not properly closed.
➢ The door seal is damaged or soiled.
The door makes a strange sound when opened.
➢ The door seals are soiled.
Compressor does not start immediately after having changed the setting.
➢ Normal operating condition..
➢ Appliance is not levelled properly.
If the appliance shows a malfunction not noted on the schedule above or if you have
checked all items on the above schedule but the problem still exists, please contact
the shop you purchased the appliance at.
The operating procedures described below are normal
➢ The refrigerant generates a sound similar to flowing water.
➢ Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
➢ The sides of the appliance may get warm while the appliance is running.
When you run the appliance for the first time or the temperature falls below a
certain level the appliance will operate with high power to reach the preset
temperature.
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
You will hear the compressor click if it is activated or deactivated.
is caused by the compressor while running.
Strong formation of encrusted ice.
Unusual noise.
and do not indicate a malfunction.
Distinct noise
Condensed water in/on the appliance
Clicking
Knocking/snapping
➢ Close the door.
➢ Clean/replace the door seal.
➢ Clean the seals.
➢ The compressor will start after a
while.
➢ Readjust the adjustable foot..
Hum
45