Control Panel; Rating Plate; Operation; Basics Of Sealing - CASO DESIGN VR 390 advanced Original Bedienungsanleitung

Please note
► Do not remove the Teflon tape (T).

16.2 Control Panel

Buttons (indicator light shows selected function)
Button Vacuum & Seal / Cancel (Vakuum & Schweißen/Abbrechen)
For automatic vacuuming and sealing of bags or containers
Press the button again to cancel the operation.
Button Food dry & moist (Lebensmittel Trocken & Feucht)
With this function you could adjust the sealing time to the consistency of your vacuum
food. Choose "Trocken" for dry vacuum food and "Feucht" for moist vacuum food where
liquid is produced.
Vacuumstrength normal & gentle (Vakuumstärke Normal & Schonend):
Two buttons for choice of different vacuum pressure:
"normal" (normal) button: for regular items storage in normal vacuum pressure ;
"gentle" (schonend) button: for some soft & crushable items storage where less vacuum
pressure is desired.
Button Sealing function (Schweißen)
For sealing of a bag without additional vacuum operatioin.

16.3 Rating plate

The rating plate with the connection and performance data can be founded on the bottom
of the unit.

17 Operation

This chapter provides instructions on the proper operation of your vacuum sealer:

17.1 Basics of sealing

After each sealing session and before starting up, check to make sure the unit and all
accessories are clean and free of leftover food. Follow the cleaning instructions on in
Chapter Cleaning and Maintenance.
35