Control Panel - CASO DESIGN VC300 Pro Original Bedienungsanleitung

16.2 Control Panel

Indicator lamps
A Indicator lamp Seal (Schweißen)
Indicates the sealing process of the bag without vacuum
B Indicator lamp Vacuum & Seal (Vakuum & Schweißen)
Indicates the Vacuum/sealing process
C Indicator lamp Adjustable Vacuum (Vakuumstärke)
Indicates the vacuum process
D Indicator lamp Vacuum Canister (Vakuum Behälter)
Indicates the vacuum process for the canister
E Indicator lamps Selectable welding time (trocken & feucht)
Indicates the welding time chosen either for dry (trocken) or moist (feucht) vacuum food.
Buttons
Stop button
You can stop the vacuum and sealing process at any time
Button Sealing function (Schweißen)
Seals a bag without first vacuuming
Button Vacuum & Seal (Vakuum & Schweißen)
Air is drawn off from inside the bag (vacuuming), immediately after this process the bag is
sealed
Button Adjustable Vacuum (Vakuumstärke)
As long as you press the button, air is drawn off from inside the bag. When you release the
button, this process will stop. Afterwards you must seal the bag via the seal function.
Button Canister Vacuum (Vakuum Behälter)
Via the vacuum hose, air is drawn off from inside the vacuum canister
Button selectable welding time (trocken & feucht)
With this function you could adjust the welding time to the consistency of your vacuum
food. Choose "trocken" for dry vacuum food and "feucht" for moist vacuum food where
liquid is produced. Please choose the corresponding sealing time before the vacuum
process.
caso VC300 Pro 36