Bags And Rolls; Making A Bag Using The Bag Roll; Vacuum Packaging With A Bag - CASO DESIGN VR 390 advanced Original Bedienungsanleitung

17.2 Bags and rolls

Please only use specified bags and rolls designed for vacuum sealing. Do not use other
materials such as plastic wrap. All vacuum rolls and bags delivered by CASO are
appropriate for cooking under vacuum (sous vide).
Please make sure when vacuum rolls and bags of other producers are used, whether they
are also microwaveable and suitable for cooking under vacuum. Please note that a bar
vacuumsealer as this device can only be used with structured bags. You can buy a wide
range of different bags and rolls from CASO.

17.3 Making a bag using the bag roll

Place the device on a dry place.
1. Unroll the bag to the desired length and cut the bag to the appropriate length with
precise and clear cut.
2. Put one end of the bag over the sealing profile.
3. Close the lid and choose desired sealing time.
4. Press seal button (Schweißen). The corresponding LED lights up and turns off when
the process is complete.
5. Press release buttons, than open the cover and take the bag out of the device. The bag
is ready for vacuum sealing.
PLEASE NOTE
► Make sure that the bag you want to use is at least 8cm/3.1in. longer than the food.
Add another 2 cm/0.8in. for each time the bag is re-used.

17.4 Vacuum packaging with a bag

Place the unit on a dry surface.
1. Place the food to be preserved inside the bag.
2. Place the open end of the bag into the vacuum chamber.
release buttons to open the cover.
PLEASE NOTE
► Do not overstuff the bag; leave enough empty length in the open end of the bag (at least
a few inches) so that the bag can be properly placed in the vacuum chamber.
► Do not wet the open end of the bag. Wet bags may not seal properly.
► Clean and straighten the open end of the bag before sealing. Foreign matter or creases
on the bag may result in a faulty seal.
3. Close the lid and choose desired sealing time and
desired vacuumstrength.
4. Press Vacuum & Seal / Cancel (Vakuum &
Schweißen/Abbrechen) and the bag will be
vacuumed and sealed automatically. The
corresponding LED lights up and turns off when the
process is complete.
You can cancel the operation at any time by
pressing Vacuum & Seal / Cancel (Vakuum &
Schweißen/Abbrechen) again, then press cover
36