Control Panel - CASO DESIGN TouchVAC Original Bedienungsanleitung

16.1 Control Panel

1 Vacuum& Seal (Vac Seal)
Draws air out of the bag and automatically changes operation to seal the bag after vacuum
is completed
2 Manual Seal (Seal): two functions:
To seal the open end of a bag without vacuuming air function
When the "Vacuum & Seal" function is in operation, this button stops the motor pump and
immediately starts to seal the bag so that less vacuum pressure inside the bag can be
controlled by the operator to avoid crushing for delicate items.
3 Sealing time (Food): 2 buttons for choosing the best bag seal time
"dry" button : for dry bags and items without moisture, with a shorter heat sealing time;
"moist" button: for wet bags or foods with moisture, with normal heat sealing time.
Default setting is for dry bags and shorter sealing time.
The LED status indicator shows which setting is selected.
4 Vacuumstrength (Mode): Two buttons for choice of different vacuum pressure:
"normal" button: for regular items storage in normal vacuum pressure ;
"gentle" button: for some soft & crushable items storage where less vacuum pressure is
desired.
Default setting is "normal" and high vacuum pressure.
The LED status indicator shows which setting is selected.
5 Stop: To cancel each vacuum or sealing process.
.
caso TouchVAC 35