Panel - CASO DESIGN VC250 Original Bedienungsanleitung

If you open the cover, you see:
• the Sealing bar, it contains a heating wire covered with Teflon which allows the bag to
seal but not to stick to the wire.
• Removable vacuum chamber. The open end of the bag must be placed inside the
chamber. This feature makes sure that air cannot escape from the bag and that excess
liquid is removed. Easy to remove and clean.
Warning
The sealing bar gets very hot.
Please observe the following safety notice in order not to burn yourself or others.
► To avoid getting burned, never touch the sealing bar directly after sealing process.
Please note
► Do not remove the Teflon tape (T).

15.2 Panel

A Indicator lamp for sealing
indicates the seal process
B Button Seal only
For sealing the bag without vacuum
C Stop
switches off the vacuuming and sealing action whenever the operator wants to stop the
operation
D Indicator lamp for vacuum
indicates the vacuum process
E Vacuum & Seal
draws air out of the bag and automatically changes operation to seal the bag after vacuum
is completed
F Indicator lamp for vacuum in canister
indicates the vacuum process
G Vacuum canister
draws air out of the canister
With the included vacuuming hose you can vacuum the Caso vacuum canister set.
37