Structure Of The User Web Interface; Using The User Web Interface - Mennekes AMTRON Professional+ E 7,4 Betriebs Und Installationsanleitung

1 "3.2 Rating plate" [} 8]
u Open the web browser and enter the
type / serial number according to the following
pattern: http://ANtype numberSNserial number
Example:
n Type / serial number (on the name plate):
1384202.10364
n Required entry in web browser: http://
AN1384202SN10364
Username and password
u Enter the username (user) and password.
1 Password: See Setup data sheet
The login information for the "operator"
might also be listed on the setup data
sheet. Entering this information opens the
web interface for commissioning, which
may only be performed by a qualified elec-
trician.
u Open the web interface only by entering
the "user" login information.
Since the user web interface has been
available only as of firmware version 5.22,
the password for products delivered with an
earlier firmware version is not included in
the setup data sheet. In this case, the pass-
word is: green_zone
It is in your own interest to change the
password after the first login.
It is not possible to call up the user web interface
If it is not possible to call up the user web interface,
check the following requirements:
n The product is switched on.
n The product and the terminal device (e. g.
smartphone, tablet, laptop) are integrated in the
same network.
40
If a connection to the user web interface still cannot
be established, the configuration could be faulty,
for example. Please contact your responsible ser-
vice partner.

7.4.2 Structure of the user web interface

1
6
Fig. 21: Structure of the user web interface for firm-
ware version 5.22 (example)
1 Menu
2 Parameter
3 Note / information *
4 Setting / status
5 Language selection button
6 Button to reset and save the changed settings
and restart the product
The notes / information (3) contain a great
deal of important information that provides
tips on the respective parameter.

7.4.3 Using the user web interface

Settings can be made in the "Dashboard" menu.
This is where the current operating values are indic-
ated and where the charging statistics can be
downloaded. Settings can be made in the remain-
ing menus.
u Configure the product according to your prefer-
ences.
5
3
2 4