Rating Plate - Mennekes AMTRON Professional+ E 7,4 Betriebs Und Installationsanleitung

Integrated protective devices
n Residual current circuit breaker type A *
n Circuit breaker *
n DC residual current monitoring > 6 mA with trip-
ping characteristics in accordance with IEC
62752
n Shunt release, in order to disconnect the char-
ging point voltage from the mains in case of a
fault (welded load contact, welding detection) *
n Switching output for controlling an external
shunt release, in order to disconnect the char-
ging point voltage from the mains in case of a
fault (welded load contact, welding detection) *
*optional
** The necessary retrofit kit (USB Ethernet adapter)
for networking (included in the delivery contents) is
not installed in the delivery state.
Optional equipment
Communication with the
vehicle according to IEC
15118 / Plug and charge
Wireless communication
modem
Circuit breaker
Residual current circuit
breaker type A
Integrated shunt release
Switching output for ex-
ternal shunt release
8
- - x - - x
x x x - - -
- x x - x x
- x x - x x
- x x - x x
x - - x - -
3.2

Rating plate

The rating plate contains all important product data.
u Observe the information on the rating plate on
your product. The rating plate is located at the
top on the bottom section of the housing.
1
Typ.SN: xxxxxxx.xxxxxx
2
xxxxxx
3
In : xx A
4
A
U : xxx V ~
5
n
f : xx Hz
6
n
EN xxx
7
8
Fig. 1: Rating plate (example)
1 Manufacturer
2 Type number / serial number
3 Type designation
4 Rated current
5 Rated voltage
6 Rated frequency
7 Standard
8 Barcode
9 Number of poles
10 IP rating
11 Use
xP+N+
9
IPxx
10
XXXXX
11