Connections On The Ecu; Inserting The Sim Card; Setting Up A Connection To The Ecu - Mennekes AMTRON Professional+ E 7,4 Betriebs Und Installationsanleitung

6.3

Connections on the ECU

1
2
Fig. 11: Connections on the ECU
Item Use
1 SIM card
2 Configuration of the
product
6.4

Inserting the SIM card

The tasks described in this section may only
be carried out by a qualified electrician.
Only valid for the product variants with modem.
ATTENTION
Material damage due to electrostatic discharge
The SIM card can be damaged due to electrostatic
discharge.
u Touch a grounded metal part before touching
the SIM card.
24
Fig. 12: Insert the SIM card
u Attach the sticker (included in the delivery con-
Connection /
slot
u Insert the SIM card in the Micro-SIM slot.
Micro-SIM
Micro-USB
6.5
If the product is connected to a terminal device (e.g.
PC, laptop), the product can be configured and
status information can be retrieved. Configuration
takes place via the web interface in a current web
browser. The web interface is password-protected.
As of firmware version 5.22, there are two different
web interfaces; one for "users" and the other one
for "operators". Entering the desired user when log-
ging in, opens the corresponding web interface.
The required password is included in the setup
data sheet.
tents) to the SIM card. To do this, follow the in-
structions on the sticker.

Setting up a connection to the ECU

The tasks described in this section may only
be carried out by a qualified electrician.