Technical Data - Mennekes AMTRON Professional+ E 7,4 Betriebs Und Installationsanleitung

4

Technical data

AMTRON® Professional(+) (E) 7,4 / 22 (PnC)
Max. charging power [kW]
Connection
Rated current I [A]
nA
Rated current of a charging point Mode 3 I
Rated voltage U [V] AC ±10 %
N
Rated frequency f [Hz]
N
Max. back-up fuse [A]
Rated insulation voltage U
Rated impulse withstand voltage U
Conditional rated short-circuit current I
Rated diversity factor RDF
Types of system earthing
EMC classification
Protection class
IP rating
Overvoltage category
Mechanical impact protection
Pollution degree
Installation
Stationary / movable
Use (according to IEC 61439-7)
External design
Dimensions H x W x D [mm]
Weight [kg]
Standard
The specific standards according to which the product was tested can be found in the declaration of con-
formity for the product.
Protective devices
Residual current device *
Circuit breaker (load safety) *
Circuit breaker (control fuse)
* Only valid for the product variants with integrated residual current device and circuit breaker.
14
[A]
nC
[V]
i
[kV]
imp
[kA]
cc
7.4 / 22
single phase / three phase
32
32
230 / 400
50
Product with circuit breaker: 100; product
without circuit breaker: 32
500
4
10
1
TN / TT (IT under certain conditions)
A+B
II
Product with charging cable: IP 44; product
with charging socket: IP 54
III
IK10
3
Outdoor or indoor
Stationary
ACSEV
Wall mounted
475 x 259 x 220
Product with charging cable: 8; product with
charging socket: 5.5
IEC 61851, IEC 61439-7
40 / 0.03A, 4p, type A
C-32A, 3p+N, 10kA
B-6A, 2p, 10kA