Led Info Bar; Multi-Function Button; Terminating An On-Going Charging Process - Mennekes Start (E) Betriebsanleitung

4.2

LED Info bar

The LED info bar displays the operating status of the charging
station. The colour scheme (green / blue) for "Operational /
Charging" depends on the setting of the configuration
switches during the setting-up process.
LED info bar Description
Ready for operation
The charging station is operational; no
lit blue
vehicle is connected to the charging
permanently
station.
Once-off authorisation (Standard E,
Basic (E/R) only)
flashes blue
The charging station is authorised for a
single charging process; no vehicle is
connected to the charging station.
Ready to charge: vehicle pauses
All requirements for charging an electric
pulsating
vehicle are met.
green
A charging process is not taking place.
The charging process is paused due to a
vehicle feedback or was terminated by the
vehicle.
Charging enabled
All requirements for charging an electric
lit green
vehicle are met. Charging in progress.
permanently
Overtemperature warning
The charging station reduces the charging
flashes
current to prevent overheating and
green
deactivation.
Wait time
Connection to the vehicle is established.
flashes
Charging at the vehicle or at the charging
white
station has been terminated. Waiting for
removing the charging cable from the
vehicle.
Fault
A fault prevents the vehicle from charging.
lit red
 See Chapter "Troubleshooting" on
permanently
page 12.
Flashes red
4.3

Multi-function button

Fig. 8: Multi-function button
The multi-function button has several functions:
A Terminating an on-going charging process (only for
charging stations without authorisation) and
acknowledging of errors.
B Re-activating the residual current circuit breaker (RCCB)
and / or circuit breaker (CB) in case of failure.
C Triggering the test-function of the residual current circuit
breaker (RCCB).

4.3.1 Terminating an on-going charging process

The charging process by charging stations without
authorisation (Start (E), Light and Pro) can be terminated with
the multi-function button.
 Press the multi-function button to terminate a charging
process.
8