Operation; Initial Use - ULTIMATE SPEED UMK 10 C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Operation

Initial use

Place the product on a level, non-flammable surface. Do
not cover the vents. Do not operate the device in dusty
environments. Doing so poses a fire hazard and could
damage the device.
For inflatables with counterpressure (e.g. partly filled car
tyre): Switch on the product before connecting the con-
nection valve to the tyre.
7
Note: Depending on the inflatable you can use the
connection valve directly or along with the included
7
valve adapters (see Fig. A).
10
Connecting to the cigarette lighter socket:
Note: Verify the socket of the cigarette lighter in your vehicle
has an adequately sized fuse.
Verify the product is switched off: on / off switch
position "0".
Plug the cigarette lighter plug
12 V cigarette lighter.
to
6
into the socket of the
5
Connecting the connection valve
Open the connection valve
(see Fig. B).
Connecting without valve adapter
- Insert the open connection valve
the inflatable (if necessary, first remove valve cover of
the inflatable).
- Hold the connection valve and close: push tensioning
lever toward connection valve
8
Connecting with valve adapter
- Push the respective valve adapter into the opening in
the connection valve
- Secure the valve adapter into the connection valve
push clamping lever
Fig. C).
- Insert the valve adapter
(if necessary, first remove valve cover of the inflatable).
Switching on / off:
Switch the device on: on / off switch
Once the desired filling pressure has been reached,
switch the device off: on / off switch
Remove the cigarette lighter plug
:
7
: clamping lever vertical
7 8
:
10
into the valve of
7
.
7
:
10
.
7
toward connection valve (see
8
into the valve on the inflatable
10
to position "I".
6
to position "0".
6
.
5
:
7
GB 15