Cleaning; Maintenance; Storage; Disposal - ULTIMATE SPEED UMK 10 C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Replace the fuse after resolving the reason for the fuse tripping
(see Fig. D).
Unscrew the tip of the cigarette lighter plug
remove the overload fuse
Insert the new overload fuse
cigarette lighter plug
5
Never use a fuse with a higher tripping current. Other-
wise, this poses a fire hazard!

Cleaning

Never immerse the product in water or spray it with water.
Risk of injury due to electric shock if moisture enters the
device. Risk of injury due to electric shock if moisture
enters the device.
Do not use cleaners or solvents. These could damage
the product beyond repair.
Keep the vents and the housing of the device clean.
3
Clean with a damp cloth or a brush.
and
5
.
11
and screw the tip of the
11
back on.

Maintenance

The product is maintenance-free.
Before and after each use, check the product and ac-
cessories (e.g. accessory tools) for wear and damage. If
required, exchange them for new ones as described in
this instruction manual. Observe the technical requirements
(see "Technical data").

Storage

Keep the product in a dry and frost-free location and
outside the reach of children.
Be sure not to kink the power cable
to prevent damage.
9

Disposal

The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
and the air hose
4
GB 17