ULTIMATE SPEED UMK 10 C2 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 12

ignore tool safety principles.
A careless action can cause severe
injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool.
Use the correct power tool for
your application. The correct power
tool will do the job better and safer at
the rate for which it was designed.
b) Do not use the power tool if
the switch does not turn it on
and off. Any power tool that cannot
be controlled with the switch is danger-
ous and must be repaired.
c) Disconnect the plug from the
power source and / or the bat-
tery pack from the power tool
12 GB
before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of
the reach of children and do
not allow persons unfamiliar
with the power tool or these
instructions to operate the
power tool. Power tools are dsitua-
tionsangerous in the hands of untrained
users.
e) Maintain power tools and
accessories. Check for misalign-
ment or binding of moving parts,
breakage of parts and any
other condition that may affect