Introduction; Scope Of Delivery; Safety Notes - Scheppach Basa 3 Original Bedienungsanleitung

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
We hope your new tool brings you much enjoyment
and success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by
the product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs
due to the non-compliance of the electric regu-
lations and VDE regulations 0100, DIN 57113 /
VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat-
ing instructions contain important information on how
to operate the machine safely, professionally and
economically, how to avoid danger, costly repairs, re-
duce downtimes and how to increase reliability and
service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in
your country. Keep the operating instructions pack-
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture.
Read the instruction manual each time before op-
erating the machine and carefully follow its informa-
tion. The machine can only be operated by persons
who were instructed concerning the operation of the
machine and who are informed about the associated
dangers. The minimum age requirement must be
complied with.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
In addition to the safety notices contained in this
operating manual and the particular instructions for
your country, the generally recognised technical reg-
ulations for the operation of identical devices must
be complied with.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
General notes
1. After unpacking, check all parts for any transport
damage. Inform the supplier immediately of any
faults.
2. Later complaints cannot be considered.
3. Make sure the delivery is complete.
4. Before putting into operation, familiarize yourself
with the machine by carefully reading these in-
structions.
5. Use only original scheppach accessories, wear-
ing or replacement parts. You can find replace-
ment parts at your scheppach dealer.
6. When ordering, include our item number and the
type and year of construction of the machine.
In these operating instructions we have marked
the places that have to do with your safety with
this sign. m
ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!

2. Scope of delivery

• Band saw
• Sawing table
• Longitudinal stop
• Dust bag connector
• Push stick
• Accesory Bag
• Hexagonal spanner SW 10/13
• Hexagonal socket head wrench SW 4/SW 5
• Operating instructions

3. Safety notes

• Please pass on safety notes and instructions to all
those who work on this machine.
• Personnel entrusted with work on the machine
must have read the operating instructions and in
particular the chapter on safety before beginning
work. Reading the instructions after work has be-
gun, is too late. This applies especially to persons
working only occasionally on the rnachine, e.g. dur-
ing setting up or maintenance.
GB | 21