Operating Conditions - WIKA GDM-RC-100-T Betriebsanleitung

9. Specifications
Material
Non-wetted parts
Case and cover
Cable gland of switch contacts,
M16 x 1.5

Operating conditions

Operating temperature
Storage temperature
Relative humidity
Leak test
Process connection / Bellows
Ingress protection of the com-
plete instrument
Test of dielectric strength
Dielectric strength
Lightning
Optional calibration valve
All weld seams are qualified in accordance with DIN EN ISO 15613 in combination with
DIN EN ISO 15614-1 and DIN EN ISO 15614-12 by the notified body TÜV Süd.
Tightening torque, test connection: 40 Nm ±10 %
Gas-tight: Leakage rate ≤ 1 · 10
For further specifications, see WIKA data sheet SP 60.80 and the order documentation.
WIKA operating instructions, model GDM-RC-100-T
Aluminium die-casting, powder-coated
Metal
Sealing range 6 ... 13 mm, tightening torque: 8 Nm
→ For further cable glands, see "Versions of cable glands"
-40 ... +80 °C [-40 ... +176 °F], gaseous phase
-40 ... +70 °C [-58 ... +158 °F]
≤ 95 % r. h. (non-condensing)
Compensating diaphragm against condensation
≤ 1 x 10 mbar x l/s
-8
IP65, IP67 for versions with integrated trasnmitter
IP67 for versions with attached transmitter
2 kV pin on grounding (case)
■
2 kV pin on pin (switch contact to switch contact)
■
1 kV pin on pin within the switch contact – 1 minute
■
7 kV x 1.2/50 μs
mbar · l/s
-8
EN
37