Herunterladen Inhalt Inhalt Diese Seite drucken

Cooking Zones/Areas And Sensors; Cooking Zone/Area Data; Pot Recognition; Switching The Hob On - hanseatic MC-IF7127B2C-A Gebrauchsanleitung

Induktions-kochfeld
Vorschau ausblenden Andere Handbücher für MC-IF7127B2C-A:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cooking zones/areas and sensors

The hob has two large cooking zones and a
cooking area. The cooking area can be divid-
ed into 2 separate cooking zones. A sensor
in the sensor panel (6) is assigned to each
cooking zone/area.
The sensors must be clean and may not be
covered by objects.
Always activate the sensors with your
entire fingertip; not just the very end of
the finger. Your finger and the sensors
must be clean and dry for the sensors to
function properly.
Each time the sensor registers a touch, you
will hear an acoustic signal.

Cooking zone/area data

Diameter/dimension
Cook-
of the cookware in
ing
mm
zone/
area
Pot
Roaster
120-160 –
160-220 –
190-240×
240-280
380-400
140-180 –
140-180 –

Pot recognition

A pot recognition function is installed in each
cooking zone/area. Pot recognition ensures
that the cooking zone/area will only be ac-
tivated if there is a pot with a ferromagnetic
base or another object made of the same kind
of metal located there. The cooking zone/
area becomes inactive as soon as the pot or
the magnetic object is removed.
Cooking zones/areas and sensors

Switching the hob on

• To switch the hob on, touch the On/Off
sensor (9).
You will hear an acoustic signal.
Horizontal lines will light up in the heat lev-
el display next to each cooking zone/area
sensor and the timer sensor (13).
zone/area within one minute of switching the
hob on, the hob will switch off automatically.
max. output
in W
Switching on/selecting the
1200 / 1500
cooking zone/area
2300 / 2600
1. Place a suitable pot or pan on the desired
cooking zone/area.
3000 / 3600
Make sure that the bottom of the cookware
1500 / 1800
and the cooking zone/area are clean and
dry.
1500 / 1800
2. Touch the corresponding cooking zone/
area sensor.
The heat setting display next to the cooking
zone/area sensor will illuminate and flash
(in this case, the display "0" will be shown,
meaning no heating output).
-
-
-
-
- -
(13)
If you do not touch a sensor or do not
place suitable cookware on the cooking
0
Page EN-13
(9)

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis