Start-Up - hanseatic VC-T4020E-1 Gebrauchsanleitung

Page EN-14

Start-up

Start-up
1. Connect the suction hose (16)
and the telescopic tube (17).
(8)
(25)
2. Squeeze the locking but-
ton (26) on the connecting
piece (25) slightly while insert-
ing the connecting piece (25)
into the opening (8).
3. Select the desired nozzle, e.g.
the universal floor nozzle (18),
and insert it into the telescopic
tube (17).
You can also insert all nozzles
directly into the telescopic tube
handle located on the suction
hose (16).
(16)
(17)
4. To change the length of the
telescopic tube (17) and thus
adjust it to the user's height,
push the release button (27)
down and slide the telescopic
tube (17) to pull it apart or to
push it together.
(26)
An audible click will indicate
that the telescopic tube (17) has
been locked in place at the next
notch.
All filters are prefitted in the fac-
tory, and your vacuum cleaner is
now ready to use.
(27)